Your Classified Ad Destination for Hutsville area > Downtown Area
> 2009
> Tektronix Y350C nettek analyzer base station tester gsm
Tektronix Y350C nettek analyzer base station tester gsm
Tektronix Y350C Mainframe NetTek Analyzer Base Station Tester with YBT250 Module and YBT1 Interface
Comes with what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from Tektronix and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
The system is guaranteed to work.
List Price is: $17,200.00 from Tektronix
The Mainframe's Serial Number Tag Reads:
The Software Tag on the RF Module:
Software Key: BLURRED FOR PROTECTION
Language Currently in Use: English
Options Key: BLURRED FOR PROTECTION
Power Required 3.3 Volt: 1.0 amps
Power Required Pos 13 Volt: 0.6 amps
Power Required Neg 13 Volt: 0.6 amps
Device Type: Base Station T&M
Signal Standards Enabled in the Menu:
* Tektronix YBT1 T1 Circuit Tester, Part Number: 015-0694-00, Model Number: YBT1, Serial Number: B010178, Hardware Version: 1.0
* Wintec 128 MB ATA Flash Card, Serial Number: W7A6128M1XA-H256
* YBT1 T1 Circuit Tester, Part Number: 119-6618-00, Test Cable
* Energy Access DC Auto Adapter
* Energy Access AC Adapter & Power Cord
* Part Number: 08921-61011 BNC Cable Male-to-Male
* Part Number: 08921-61021 BNC-SMA Cable Male-to-Male
* Certificate of Calibration from Tektronix (Dated 13-Nov-2001)
Link to the Y350C Analyzer Datasheet: Tektronix TekNet Y350C Base Station Analyzer Datasheet
Link to the YBT250 Module Datasheet: Tektronix TekNet YBT250 Base Station / Interference Module
Option IN1: Interference Analyst.
Option IR1: RF measurements for IS-136.
Option GR1: RF measurements for GSM.
For More Pictures Please Click the Following:
* Picture 4 - Back View (Without Pouch)
* Picture 7 - Interfaces on Top #1
* Picture 8 - Interfaces on Top #2
* Picture 10 - PCMCIA Cards Installed
* Picture 11 - Little Panel on the Back Removed
* Picture 14 - Power Adapter & Car Plug
* Picture 15 - Module's Serial Number Tag #1
* Picture 16 - Module's Serial Number Tag #2
* Picture 17 - Mainframe's Serial Number Tag
