Your Classified Ad Destination for Hutsville area > South Hutsville
> 2006
> 1998 doall model 4100NC, 14'' x 16'' automatic band saw
1998 doall model 4100NC, 14'' x 16'' automatic band saw
DOALL MODEL 4100NC, 14†X 16†AUTOMATIC BANDSAW
14 IN. HIGH X 16 IN.WIDE (355 X 410 MM) RECTANGLES,
16 IN.(410 MM) ROUNDS, 14 IN. (355 MM) SQUARES
BLADE DIMENSIONS 1-1/2 X 186 IN. (41 X 4,570 MM)
SPEED: INFINITELY VARIABLE BAND SPEED DRIVE 40-360 FPM (12-110 M/MIN)
TOTAL MOTOR CAPACITY 12.2-HP (9.1 KW)
HYDRAULIC SYSTEM 2-HP (1.5 KW)
BAND WHEEL DIAMETER 21 IN. (535 MM)
COOLANT PUMP 1/10-HP (.075 KW)
MIN. BUTT END WITH AUTOMATIC FEED 3 IN. (75 MM)
PASS LINE HEIGHT (MINIMUM) 30-1/2 IN. (775 MM) S
INGLE AUTOMATIC INDEX LENGTH 24 IN. (610 MM)
INDEX LENGTH, MIN AUTOMATIC INDEX LENGTH 1/4 IN. (6 MM)
POWERED CHIP CONVEYOR TO DISCHARGE CHIPS
COOLANT SYSTEM INTEGRAL COOLANT PUMP,
COOLANT APPLIED THROUGH SAW GUIDES FLUSHING HOSE
WORKLIGHT MOUNTED ON CONTROL PANEL
IDLER WHEEL MOTION DETECTOR STOPS MACHINE AUTOMATICALLY IF BAND STALLS IN WORKPIECE
VARIABLE VISE PRESSURE CONTROL, WITH GAGES LOCATED BY OPERATOR'S CONTROL CONSOLE
RAPID TRAVEL INDEX VISE CONTROL
PROGRAMMABLE CUT LENGTH WITH DIGITAL READOUT
COOLANT PACKAGE POWER DRIVEN BAND CLEARING BRUSH
BAND SPEED CONTROL AND DISPLAY AT OPERATOR'S CONTROL PANEL
AUTOMATIC BAND-KERF COMPENSATOR
SAW HEAD-RAPID APPROACH CONTROL
DISCHARGE TRAY WITH COOLANT RETURN
Prices do not include any federal, state or local taxes, which are in addition to the purchase price and must be paid by the Purchaser. Any and all foreign duties and taxes are the responsibility of Purchaser. Unless Purchaser furnishes Encore Tools & Equipment Inc. with a tax exemption certificate, any sales, use, excise, or other similar tax, where applicable, shall also be the responsibility of Purchaser and may, at the election of Encore Tools & Equipment Inc., be added to the quoted purchase price and invoiced by Encore Tools & Equipment Inc. to Purchaser. The failure of Encore Tools & Equipment Inc. to invoice such taxes does not excuse the Purchaser from responsibility for paying necessary taxes.
Some machinery and equipment is located at Manufacturing Facilities. Most of the machinery and equipment located at these Facilities is disconnected and cannot be seen under power. Unless specifically listed in writing by Encore Tools & Equipment Inc., all machinery and equipment uses 3 Phase power.
Email: ****@encoretools.com
