Your Classified Ad Destination for Hutsville area > Downtown Area
> 2003
> Cutler-hammer eaton DH362NRK heavy duty switch
Cutler-hammer eaton DH362NRK heavy duty switch
Eaton Cutler-Hammer DH362NRK Heavy Duty Safety Switch New in Box(010907709010)
This does not mean that the unit doesn’t work, only that we have not tested or checked it out.
This may also mean that we are not knowledgeable in that specific item.
Please call MONIQUE Toll Free at 1-866-MHZ-ELEC (1-(***)-649-3532) if you have questions
between the hours of 9:00 AM and 4:00 PM Monday thru Friday Pacific Time.
The Item may vary from picture as manufacture may change model appearance.
All information, including description, specifications and features are from a manufacturers
data sheet or manual and are subject to change without notice.
Meaning that all information included in the description, specifications and features
What you see is what you get! If it doesn’t show it you probably won’t get it!
Eaton Cutler-Hammer DH362NRK Heavy Duty Safety Switch New in Box
* Serial Number: !!Quantity of 2 Available!!
* Description: Heavy Duty Safety Switch, 60 Amps, 600 Volts, 4 Wire S/N Fusible, NEMA 3R Rainproof
* Enviro-Line Stainless Steel Switch: primarily for use in the meatpacking and food processing industries or any application where water is frequently used to hose down equipment. In addition to the stainless steel NEMA 4X enclosure, the interior mechanism, back pan, and springs are stainless steel. Ratings for these Heavy Duty switches are 30 – 400 amperes, 240 – 600V AC, available as fusible and non-fusible switches.
* Window Switches: These switches are available with either an upper window over the switch contacts or a lower window over the fuse block. The upper window provides visual verification of ON/OFF status. The lower window switch allows for visual verification of fuse status if used in conjunction with Littelfuse, Inc fuses with blown fuse indicator. Ratings are 30-800 amperes, 240 – 600V AC, fusible and non-fusible. Available in NEMA 12/3R, 4X stainless steel enclosures.
* Receptacle Switches: These Heavy Duty Switches are pre-wired and interlocked to polarized receptacles for three-phase, three-wire, grounded type power plugs. These are used for portable power applications such as welders, infrared ovens, batch feeders, conveyors, truck and marine docks. Receptacles are interlocked to handle mechanisms so that power plugs may not be inserted or removed when the switch is in the ON position unless noted otherwise. Ratings are 30 – 100 amperes, 600V AC, NEMA 12, 4X stainless steel enclosures.
* Non-Metallic Switch: This switch has a KRYDON™ enclosure. This is a compression molded fiberglass reinforced polyester enclosure, which is capable of withstanding almost any corrosive environment. Ratings are 30 – 200 amperes, 240 – 600V AC, fusible and non-fusible. Enclosure is NEMA 4X rated.
* Meets NEC article 430 requirements for a separate disconnect means within sight of all motor loads.
* Padlockable in the OFF position (up to three padlocks) to meet OSHA lockout requirements.
* Available in 16 – 100 ampere ratings.
* 600V AC, three- and four-pole non-fusible device
* Rated for making and breaking loads
* Accepts auxiliary contacts. Capability to signal PLC controllers
* Ground lug connection provided
* Visible double break rotary blade mechanism
* Mechanically interlocked cover to prevent easy access when the switch is in the ON position
* Clear line shield with probe holes
* Clearly visible palm fitting red handle
* Triple padlocking capability
* Tangential knockouts on NEMA 1 and NEMA 3R enclosures through 200A
* Built-in fuse pullers on NEMA 4X and NEMA 12 enclosures through 200A
* Additional door locking capability
* Complete accessory and renewal parts data shown on inner door label
* 30 – 200A NEMA 12 designs convertible to NEMA 3R by opening factory installed drain hole
