Your Classified Ad Destination for Hutsville area > East Hutsville
> 2005
> Miller spectrum 125C plasma, 115 v, 3/16" cut cap
Miller spectrum 125C plasma, 115 v, 3/16" cut cap
Miller Spectrum 125C Plasma Cutter
The plasma arc is created by pulling an electrical arc between an electrode and tip. This process eliminates high frequency by forcing an electrical arc between the two pieces.
LVCâ„¢ Line Voltage Compensation
Keeps output of the power source constant regardless of fluctuation in input power ± 10%.
The expanded metal mode allows operator to cut grates, chain link fence, and other perforated metals without retriggering the gun.
Protection to extend the life of consumables and the welding torch is enhanced by our post flow circuit that provides shielding gas after you release the trigger.
Built-in, heavy-duty industrial piston-driven compressor provides long life and superior airflow.
Solid-state, constant-current design offers consistent 12 amp cutting arc for continuous quality cutting up to 3/16 in steel in steel.
Electronic Pilot Arc Controller automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life.
LVCâ„¢ line voltage compensation provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts.
35% duty cycle is tested at 40° C (104° F) to give you the cutting power whenever you need it.
Starts without high-frequency so it will not interfere with or damage controls or computer.
* 12 A at 110 VDC, 35% duty cycle
* 115V Model with torch: 50 lb (22.7 kg)
* ICE-12 C hand-held torch with 20 ft (6.1 m) cable
* Heavy-duty work clamp with 20 ft (6.1 m) cable
* Extra consumables (2 electrodes, 2 tips)
* Money Orders & Cashier Checks may be sent to:
* Orders generally take 5-6 Business Days to reach you.
If your package arrives damaged, please contact us to arrange the best way to handle your return.
Due to safety requirements involved with much of the equipment we carry, product returns of used equipment is handled on a case-by-case basis.
