Your Classified Ad Destination for Hutsville area > East Hutsville
> 2009
> Pulizzi power distribution rack mounted
Pulizzi power distribution rack mounted
Please visit our other categories for more items!
Pulizzi Power Distribution Rack Mounted
Dimensions: 21.00" L x 9.00"H x 4.00" W
RACK MOUNTED 19 x 1.75 (1U) x 7.0 VOLTAGE SELECTABLE 120V~ or 240V~ input/output Voltage output matches input EMI/RFI FILTERING Common Mode - line to ground Differential Mode - line to line Refer to Chart 4 on page 43 SPIKE/SURGE SUPPRESSION L-L (240V mode uses 270V MOV) L-N (120V mode uses 150V MOV)(10) IEC60320 C13 OUTLETS 2 on the front and 8 on the rear panel. Mating plug would be a C14 male. Rated by UL/CSA up to 250V~/15A Rated by VDE at 250V/10A each IEC320 (C20 MALE) POWER INLET On the rear panel, rated by UL/CSA at 125V~/20A or 250V~/16A and by VDE at 250V~/16A 2 INDICATOR LIGHTS on front panel. Each one for voltage selected and power on to system. OVERLOAD CIRCUIT PROTECTION Precision electromagnetic breakers, with a long time delay curve, provide both manual on/off switching and open (trip) automatically with an overload condition. Kick Guards are provided. PANEL MOUNT FUSE 1A slow blow fuse Front panel fuse surge suppression failure.
1) New Surplus: Equipment or parts are new.
2) Used, Tested, Good: We tested the unit and cycled it and found no obvious faults.
3) Used, Pulled, Good: Pulled from a working unit, and because of propietary design, the complete working unit was demanufactured, and the parts sold.
4) Used, Untested: Items that we did not test or cannot test. This item was received by us as an individual part or integrated equipment that could not or was not tested.
Orders made in Puerto Rico will be charged 7% Sales Tax.
Visit our store for more items!
