Your Classified Ad Destination for Hutsville area   >   East Hutsville   >   Lorenz 630 3-point two stage snow blower

Lorenz 630 3-point two stage snow blower


Lorenz snow blowers mount on the rear 3-point of most sizes of farm tractors. They are intended for general farm use, however they are designed to withstand industrial and commercial use. All series blowers are of the two-stage type. Each has two augers and a fan. The augers are driven with heavy roller chain. The augers are made with paddles that break up the snow for easier feeding into the blower. These paddles are very effective, especially when blowing hard snow or snow that has been moved once already. The drives are protected by shear pin assemblies. All models have replaceable cutting edges that are made from abrasion resisting material. Equipment has well braced corners and has easy access for shear pin replacement.
The 30 series blowers are designed for tractors up to 40 HP. All models have a 26 inch fan housing and two 11 inch diameter augers. Input RPM is 540 for all 30 Series. The 3 point hitch is Category I. This Model 630 is 78" wide, the auger diameter is 11", fan diameter is 26" and weight is approximately 560 pounds. This snow blower is new, never used. The paint is weathered and shows some rust since unit has been stored outside. This a 2004 model. Serial number is 1579.
Prefer local pickup. Delivery is available within 100 miles of Frederick, Maryland at $2.00 per loaded mile. Mileage to be determined by Mapquest.
Thanks for considering our equipment.



Lorenz 630 3-point two stage snow blower Lorenz 630 3-point two stage snow blower Lorenz 630 3-point two stage snow blower