Your Classified Ad Destination for Hutsville area > Maple Grove Area
> 3/4 hp dc motor permanant magnet,variable speed /torque
3/4 hp dc motor permanant magnet,variable speed /torque
MOTOR IS FOR USE AT 90 VOLT DC rectified SYSTEMS ONLY. This is a used motor intended for variable speed or variable torque (with up to base speed uncontrolled) applications. It has been checked for good or replaced brushes as well as shorts or resistance to ground and the bearings. Most all of our DC motors that come in get new bearings and brushes regardless of use. exceptionally good brushes will be left as long as no problems appear. DC motors are able to run in torque mode like servos with proper controller or resistors. Torque control is where the motor runs at full speed until it is loaded down and then will run what ever speed is needed to apply a force based on the speed pot dial setting. This is a standard 56 C face mounted motor for connection to a gearbox or other mounting flange. the 5/8 shaft is standard dimensions.possible that there is a replaced connection box for this and also has no foot mount plate We cushion pack in boxes rated twice the weight to try to prevent damage, particularly with permanant magnet motors that can loose the magnet bonding if dropped or hit hard.
Check our store or ask to have us list many of our other DC drives and motors you may need. should have in our store listings many other types of dc with shunt and stabilized shunt winding types, generator types and high speed field and armature controlled units. Constant torque and variable torque or constant horsepower connectable. Up to 30 KW.