Your Classified Ad Destination for Hutsville area > North Hutsville
> Red lion control part#SCD00400 2998
Red lion control part#SCD00400 2998
Red Lion Control Part No. SCD00400 2998
This item is used. The information below is from the manufacturors website.
1. PRIMARY SUPPLY VOLTAGE: Available in two voltage ranges, 50/60
Hz (See Ordering Information). Allowable voltage variation ±10%. Input
power 11.2 VA. Also operates from +12 VDC Supply (See Application
2.*SENSOR OUTPUT POWER (TERM.“Aâ€): +12 VDC ±15% @ 100 mA.
3. RESET & PRESET TIMING PARAMETERS:
A. COUNT-AFTER-RESET - With RTZ action new counts can be accepted
75 µsec after reset. With RTP action new counts can be accepted 1 msec
B. Preset loading occurs on timed output or reset.
SNK OUT - Primary output (current sinking) to drive control relay, 100 mA
max. This output goes low when preset count (RTZ) or zero count (RTP)
SRC OUT - Aux. Output (inverted) operates synchronously with “SNK
OUT†to deliver +12 VDC @ 10 mA.
5. CURRENT DRAIN FROM BATTERY BACKUP: 60 mA with displays
blanked and without sensor or output loads. 350 mA (6-digit), 260 mA (4-
digit) with full display on (all 8’s) but less sensor and output load.
6. OPERATING TEMPERATURE RANGE: -20° to +50°C
7. CONSTRUCTION: Steel Case, Aluminum Bezel, Aluminum Front Panel
with Polycarbonate Overlay, Black Epoxy Paint Finish.
Please contact me with any questions, I have more photos and info if needed.
Contact us by email at ****@yahoo.com with your questions, and please, visit our website at:
