Your Classified Ad Destination for Hutsville area > North Hutsville
> Yr.2006
> Allen bradley hi 1756-ws card for control logix plc
Allen bradley hi 1756-ws card for control logix plc
We bought the spare parts crib at an exotic biotech company that moved to a bigger facility and left everything behind: Here is a 1756-WS card. Manufactured by Hardy Scale Company, this unit will interface a 350 ohm load cell weighing system directly to the control Logix processor. These units are Series A but were factory upgraded to Ver. 1.6 firmware and Rev E of the 0535-0491-01 digital PWA (whatever that is) in 2003. We have a copy of the Hardy scale work order and will include a copy with each order. They have WaverSaver and C2 Calibration Technology. We Also have a couple of the C2 junction boxes and a big roll of RTA cable to go between the card and the junction Box elsewhere in the store . (If they are like most AB stuff you can expect to pay another $500 or so to get the cable and J Box!) The plug in connector for the front of this card is a Phoenix MC 1.5/9 - STF 3.81 , Phoenix part no. 1827774. We only have one connector. These are special order connectors. We can get this connector "off the shelf" without the hold down screws and would be gald to do so if you want them. If you want the ones with hold down screws, it will take some time.
