Your Classified Ad Destination for Hutsville area > North Hutsville
> Yr.2007
> Dc motor controller for permanent mag or shunt
Dc motor controller for permanent mag or shunt
this control will work with the 1 HP 2500 RPM 90 VDC MOTOR GE MOTOR WE HAVE LISTED (190156538724)
Brand new. Multi-drive solid state DC speed control. For operating permanent magnet or shunt wound motors. Complete with dual voltage switch for input voltages of 120 volt AC or 240 volt AC, line fuse, ON/OFF switch, and variable speed dial.
Runs up to 3/4 HP, 90-130 volt DC motor with 120 volt AC input or 1-1/2 HP, 180 volt DC motor with 240 volt AC input. With auxiliary heatsink (Item 11-2101-H, see at right) HP rating increases to 1 HP at 120 volt AC input or 2 HP at 240 volt AC. Requires plug-in resistor and fuse (not included -see chart below). Shpg 3 lbs.
OPTIONAL BRAKING SWITCH IS AVAILABLE FOR THIS ITEM - SEE LISTING
Plug-in Resistor and Motor Fuses are also available for this item.
according to your HP requirement.
ITEM # IS a Surplus Center Item Number Fuse $5 / Resistor $5
* Requires auxiliary heatsink.
