Your Classified Ad Destination for Hutsville area > South Hutsville
> Xantrex XRF60-46 dc programmable dc power supply, 2.8KW
Xantrex XRF60-46 dc programmable dc power supply, 2.8KW
Used, but in new condition, Xantrex XFR60-46, Programmable DC power supply. 0-60VDC, 46 Amps, 2.8Kw. Configured for single phase 190-264VAC input power. The unit was purchased new, and used for a short-term bench test only. Purchased new for $2,800.00.
XFR60-46 is the smart choice for research, product development and production test applications such as R&D, magnet control, product design, ATE, process control, electroplating and burn-in. The unique features of XFR make it the best choice for OEM applications where high power and a wide adjustment of output voltage or current are required in a full 19-inch rack package.
190-264 VAC, 1 phase (24.3 A @ 208 VAC; 20.5 A @ 230 VAC typical), 47-63 Hz; Option: M2 3-phase 208 VAC input.
Nominal 31 kHz (62 kHz output ripple)
7 s maximum from power on until output stable
Voltage Mode Transient Response Time
<3 ms for output voltage to recover within 0.5 % of its rated voltage after a step change in load current of up to 10% to 90% of rated output
+/-600 VDC from output to safety ground
2.5-15 V signal or TTL-compatible input, selectable logic
Voltage and current programming inputs (source must be isolated): 0-5 k, 0-10 k resistances;0-5 V, 0-10 V (default) voltage sources
Voltage and current monitor outputs 0-5 V, 0-10 V (default) ranges for 0-100% of output
Remote Programming and Monitoring Accuracy
1% zero to full scale output for the default range
Maximum Remote Sense Line Drop Compensation
5 V/line (Line drop is subtracted from total voltage available at supply output)
32° F to 122 ° F (0° C to 50° C)
-4° F to 158° F (-20° C to 70° C)
Front Panel Voltage and Current Control
10-turn voltage and current potentiometers
Front Panel Voltage Control Resolution
3-terminal, 34 A/250 V, wire clamp connector with strain relief cover
7.5 to 100 V models: nickel-plated copper bus bars with bus bar cover and strain relief;150 V to 600 V models: 4-terminal, wire clamp connector with cover and strain relief
3.5 x 19.0 x 21.0†(88.9 x 429.4 x 533.5 mm)
Email for more detailed specs or questions.
